CU Compressed 8kV NLEPR Insulation 133% IL ARMOR-X® PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial - VFD Cable
CU Compressed 8kV NLEPR Insulation 133% IL ARMOR-X® PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial - VFD Cable
Part No. SPEC 46284
Applications:
Southwire’s 8KV ARMOR-X® are armored cables for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, 250°C for short circuit conditions, and -50°C for cold bend. For uses in Class I, II, and III, Division 1 and 2 hazardous locations per NEC Article 501, 502, and 503. Suitable for VFD application.
Standards & References:
- ASTM B3: Soft or Annealed Copper Wire
- ASTM B8: Concentric-Lay-Stranded Copper Conductors
- ASTM B33: Standard Specification for Tin-Coated Soft or Annealed Copper Wire
- ASTM B496: Compact Round Concentric-lay-standard copper
- UL 1072: Medium-Voltage Power Cables
- UL 1685: FT4 Vertical-Tray Fire Propagation and Smoke Release Test
- UL 1685: Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- ICEA S-93-639: (NEMA WC 74) 5-46 KV Shielded Power Cable
- ICEA S-97-682: Standard for Shielded Utility Cable Rated for 5 - 46kV
- IEEE 1202: FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
- AEIC CS-8: Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
- Made in America:: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661
Construction:
- Conductor: Class B compressed stranded bare copper per ASTM B3 and B8 (Tinned Copper per ASTM B33 optional)
- Conductor Shield: Semi-conducting cross-linked copolymer
- Insulation: 140 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
- Insulation Shield: Strippable semi-conducting cross-linked copolymer
- Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
- Grounding Conductor: 3 Class B compressed stranded bare copper ground per ASTM B3 and B8 (Tinned Copper per ASTM B33 optional)
- Filler: Wax paper filler
- Binder: Polypropylene tape
- Armor: ARMOR-X Continuous Corrugated Welded Armor
- Overall Jacket: Yellow Polyvinyl Chloride (PVC)
Shipping
Shipping
Shipping costs are customized by order and will be included on your quote. These costs may vary due to variables such as order size or quantity per manufacturer.