CU 600/1000V XLPE Insulation ARMOR-X® PVC Jacket XHHW-2. CT Rated -Sunlight Resistant - For Direct Burial - Silicone Free

Part No. SPEC 45352

Specifications: 

Southwire’s 600 Volt Type MC-HL ARMOR-X® power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, 250°C for short circuit conditions, and -50°C for cold bend. For uses in Class I, II, and III, Division 1 and 2 hazardous locations per NEC Article 501, 502, and 503.

Standards & References: 

• ASTM B3: Soft or Annealed Copper Wire
• ASTM B8: Concentric-Lay-Stranded Copper Conductors
• UL 44: Thermoset-Insulated Wires and Cables
• UL 1569: Metal-Clad Cables
• UL 1685: FT4 Vertical-Tray Fire Propagation and Smoke Release Test
• ICEA S-58-679: Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE)
• ICEA S-95-658: (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
• IEEE 1202: FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)

Construction: 

• Conductor: Class B compressed stranded bare copper per ASTM B3 and B8
• Insulation: Cross Linked Polyethylene (XLPE) Type XHHW-2
• Grounding Conductor: Class B compressed stranded bare copper per ASTM B3 and B8
• Filler: Paper filler (cable size 8 & 6 uses Polypropylene filler)
• Binder: Polypropylene tape
• Armor: ARMOR-X Continuous Corrugated Welded Armor
• Overall Jacket: Polyvinyl Chloride (PVC) Jacke