Category 6A Indoor/Outdoor UTP CMP Copper Cable

Category 6A Indoor/Outdoor UTP CMP Copper Cable

INSTALLATION ZONE RECOMMENDATION - HEAVY DUTY

Description: 

Construction

Conductor:

• 23 AWG Solid Copper
• Insulation: FEP

Color Code:

Pair 1: Blue - White

Pair 2: Orange - White

Pair 3 - Green - White

Pair 4: Brown - White

Jacket

• Cable Diameter: 0.270” (nominal)
• Black PVDF

Cabling

THE FOUR (4) TWISTED PAIRS ARE CABLED AROUND AN ISOLATOR WITH A LEFT HAND LAY AND WRAPPED WITH A POLYESTER TAPE. TAPE IS APPLIED OVERALL (ALUMINUM SIDE IN) AND A 24 AWG, 25% ± 10% OVERLAP ON TAPE.

Category 6A UTP Electrical Characteristics*:

• Characteristic Impedance: 100 ± 15Ω (1.0 to 500 MHz)
• Maximum Conductor Resistance: 8.0Ω / 100 Meters @ 20° C
• Maximum Resistance Unbalanced: 4%
• Maximum Mutual Capacitance: 5.6nF/100 meters @ 1kHz
• Nominal velocity of propagation (NVP): 70%

Features:

• Suitable for Indoor (CMP) and Outdoor Locations 
• Not Suitable for Direct Burial
•  Sunlight Resistant
• Tested from 1 to 650 MHz and Offers Typical Performance Headroom above TIA Category 6A Cable Requirements
• Compatible with OCC Category 6A jacks and patch panels for optimal system performance
  

Applications:

• 10GBASE-T Ethernet
• 2.5/5GBASE-T Ethernet
• 1000BASE-T Gigabit Ethernet
• Supports all IEEE standards for DC power delivery over 4-pair cabling when installed in accordance with TIA Telecommunications Systems Bulletin TSB-184-A, Guidelines for Supporting Power Delivery Over Balanced Twisted-Pair Cabling
• All other applications developed for operation over Category 6A cabling