3/C CU 600V XLPE XHHW-2 ARMOR-X PVC Power Cable With Ground VFD

3/C CU 600V XLPE XHHW-2 ARMOR-X PVC Power Cable With Ground VFD

Description: 

Type MC-HL Power Cable 600Volt Three Conductor Copper, Cross Linked Polyethylene (XLPE) insulation XHHW-2 Continuous Corrugated Welded Armor (Armor-X), Polyvinyl Chloride (PVC) Jacket with 3 Bare CU Ground

Application: 

Southwire’s 600 Volt Type MC-HL Armor-X® power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, 250°C for short circuit conditions, and -50°C for cold bend. For uses in Class I, II, and III, Division 1 and 2 hazardous locations per NEC Article 501, 502, and 503. Suitable for VFD application.

Standards & References:

• ASTM B3 Standard Specification for Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• UL 44 Thermoset-Insulated Wires and Cables
• UL 1309 Marine Shipboard Cable
• UL 1569 Metal-Clad Cables
• UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
• ICEA S-58-679 Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE)
• ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
• IEEE 1202 FT4 Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 - (210,000 Btu/hr)
• ABS Listed as CWCMC

Construction: 

• Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
• Insulation:Cross Linked Polyethylene (XLPE) Type XHHW-2
• Grounding Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
• Filler:Paper filler (cable size 8 & 6 uses Polypropylene filler)
• Binder:Polypropylene tape
• Armor:Continuous Corrugated Welded Armor (Armor-X)
• Overall Jacket:Polyvinyl Chloride (PVC) Jacket